Main Machine Installation: Installation Procedures
D0CA/D0C9/D0C8/D0CB 2-28 SM
Checking the Copy Image with Test Chart
Check the copy image quality with a test chart.
Non-fax standard model:
Check that the printer can print out in the customer’s environment.
Fax standard models:
Check that the fax can output a received image as well.
2.4.8 AUTO REMOTE FIRMWARE UPDATE (ARFU) SETTINGS
Specify ARFU settings as required.
Operating Conditions:
• ARFU requires an internet connection. Be sure to get permission from the customer
before setting up ARFU.
• The connection is one-way, so the user’s data cannot be accessed from the firmware
server.
ARFU enable setting
1. Server connection check
2. Prohibited date and time setting
Set SP5-886-111 (Auto Update Setting) to "1 (ON)".
1: ON / 0: OFF (Default)
To download the firmware only using SFU (Smart Firmware Update), and not by ARFU,
specify the settings as follows:
- SP5-886-111(Auto Update Setting) to "0 (OFF)"
- SP5-886-115 (SFU Auto Download Setting) to "1 (ON)"
To Next Page
Loading...
