Dehumidification Heater (PFU)
D0CA/D0C9/D0C8/D0CB 2-124 SM
• The following junction harness [A] (D1965265 / Accessory #4) is the same harness
that is supplied with the anti-condensation heater or dehumidification heater (main
unit). So if you already have it, you can use it.
2.19.2 INSTALLATION PROCEDURE
• Turn OFF the main power and unplug the power cord from the wall socket. If the main
power is not turned OFF before installing, an electric shock or malfunction might occur.
• Do the following procedure not to damage any harnesses.
• Check that harnesses are not damaged or pinched after installation.
For Installing the Tray Heater on the 1st Paper Feed Unit
1. Pull out the paper feed tray.
2. Remove the upper left cover [A].
To Next Page
Loading...
