Bypass
SM 4-181 D0CA/D0C9/D0C8/D0CB
&
Adjustment
4. Remove the bypass feed unit [A].
• Lift up the left side of the unit and remove it while pulling it out forward.
4.16.3 PAPER END SENSOR (BYPASS) (S6)
1. Remove the duplex unit.(Duplex Unit)
2. Remove the bypass feed unit. (Bypass Feed Unit)
3. Remove the bracket [A].
4. Remove the paper end sensor (bypass) (S6) with the holder [A].
To Next Page
Loading...
