Ricoh IM C300

SP2-XXX (Drum) -1
D0CA/D0C9/D0C8/D0CB 3-48 SM Appendices
SP No. Large Category Small Category ENG
or
CTL
[Min to
Max/Init./Step]
0xFFFF /
0x0000 /
1/step]
2-110-005 LD Driver Error Ye ENG [0x0000 to
0xFFFF /
0x0000 /
1/step]
2-110-006 LD Driver Writing Unit Adj.
Transfer
ENG [0 to 1 / 0 /
1/step]
2-111-001 Forced Line Position Adj. Mode a ENG [0 to 1 / 0 /
1/step]
2-111-002 Forced Line Position Adj. Mode b ENG [0 to 1 / 0 /
1/step]
2-111-003 Forced Line Position Adj. Mode c ENG [0 to 1 / 0 /
1/step]
2-111-004 Forced Line Position Adj. Mode d ENG [0 to 1 / 0 /
1/step]
2-112-001 TM/ID Sensor Check Execute ENG [0 to 1 / 0 /
1/step]
2-112-010 TM/ID Sensor Check Display Result:
Front-Center-Rear
ENG
*
[0 to 999 / 0 /
1/step]
2-112-020 TM/ID Sensor Check Threshold Setting ENG
*
[0.00 to 5.50 /
1.90 /
0.01V/step]
2-117-001 Skew Adjustment Ma:Skew Adjustment ENG
*
[-256 to 256 /
0 / 1click/step]
2-117-002 Skew Adjustment Cy:Skew Adjustment ENG
*
[-256 to 256 /
0 / 1click/step]
2-117-003 Skew Adjustment Ye:Skew Adjustment ENG
*
[-256 to 256 /
0 / 1click/step]
2-117-004 Skew Adjustment Bk:Skew Adjustment ENG
*
[-256 to 256 /
0 / 1click/step]
2-140-00
5
TM/ID Sensor Check PWM: Front ENG
*
[0 to 1024 / 0 /
1/step]
2-140-00
6
TM/ID Sensor Check PWM: Center ENG
*
[0 to 1024 / 0 /
1/step]