1-Bin Tray BN1040 (D574-59)
D0CA/D0C9/D0C8/D0CB 2-82 SM
When installing the scanner unit, make sure that the harnesses are not pinched between
the scanner unit and the 1-bin tray unit .
7. Attach the grounding plate [A] and clamp the harness [B] to the A DF. (Upper: blue screw ×1,
Lower: M3x10 (existing))
8. Connect the relay board (PCB12) [A] and FFC [B].
Turn over twice to unravel the FFC.
The FFC does not have a lock mechanism, so push it straight in to connect it. .
When reassembling, the FFC must be connected straight. If not connected properly,
SC154, SC151, SC152 and SC112 may occur.
To Next Page
Loading...
