Printer Service Mode
D0CA/D0C9/D0C8/D0CB 3-430 SM Appendices
1003 [Clear Setting]
001 Initialize System CTL* Initializes settings in the System menu of the user mode.
003 Delete Program CTL* DFU
1004 [Print Summary]
001 Service
Summary
CTL Prints the service summary sheet (a summary of all the
controller settings).
1005 [Display Version]
002 Printer Version CTL Displays the version of the controller firmware.
1101 [ToneCtlSet]
Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous
setting, or c) the current setting.
001 Factory CTL [ - / - / - ]
[Execute]
002 Previous CTL
003 Current CTL
004 ACC CTL
1102 [Resolution Settings]
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk (*)
shows which mode is set.
• 00: *1200x1200Photo
• 01: 600x600Text
• 02: 1200x1200Text
• 03: 1200x600Text
• 04: 600x600Photo
• 05: 1200x600Photo
• 06: 600x600Text
• 07: 600x600Text
1102-001 Tone Control Mode Selection CTL [0 to 99 / 0 / 1/step]
1103 [PrnColorSheet]
1103-001 ToneCtlSheet CTL Prints the test page to check the color balance before and after
the gamma adjustment.
1103-002 ColorChart CTL
1104 [ToneCtlValue]
Adjusts the printer gamma for the mode selected in the Mode Selection menu.
To Next Page
Loading...
