Scanner Service Mode
SM Appendices
3-435 D0CA/D0C9/D0C8/D0CB
SP Mode Tables
- Message
- Subject
- Fail name
1013 [Scan to Media Device Setting]
1-013-002 0:OFF 1:ON *CTL [0 or 1 / 1 / 1 /step]
Enable or disable ScanTo media device.
1014 [Scan to Folder Pass Input Set]
1-014-001 0:OFF 1:ON *CTL [ 0 or 1 / 0 / 1 /step]
Sets enable or disable the password setting when make a Scan to Folder job.
1016 [Scan To Email Sender Address]
1-016-001 0: Login user address
1: POP before SMTP address
*CTL [ 0 or 1 / 0 / 1 /step]
Specify the Scan To Email sender address.
1040 [Scan: LT/LG Mixed Sized Sizes Setting]
1-040-001 0:OFF 1:ON *CTL [0 or 1 / 1 / 1 /step] (NA)
[0 or 1 / 0 / 1 /step] (Other)
Enables or disables mixing LT/LG size documents for scanner.
0: Disable, 1: Enable
Default
For North America: 1
Others: 0
1041 [Scan:FlairAPI Setting]
1-041-001 0x00 – 0xff *CTL * see BitSwitch below:
Sets Scanner FlairAPI Function enable / disable.
This SP is set by BitSwitch and needs to reboot the machine after making changes.
bit Setting meanings Description
0 1
bit 0 Start of FlairAPI
Server
Off
(Do not
Start)
On
(Start)
Sets whether to start exclusive
FlairAPI http server. If it is 0, scanning
FlairAPI function and simple UI
function will be disabled.
bit 1 Access
permission of
FlairAPI from
Disabled Enabled If it is “0”, accessing is limited from the
machine only, such as operating panel,
SDK/J, MFP browsers etc… If it is “1”,
To Next Page
Loading...
