Ricoh IM C300

Input and Output Check
SM Appendices
3-447 D0CA/D0C9/D0C8/D0CB
Appendices
SP Mode Tables
No. Part Name SP Name SP No. Reading
0 1
7 Paper end sensor
(bypass) (S6)
Bypass Paper End
Detection Sensor
5-803-003 Paper
detected
Paper not
detected
8 Registration
sensor (S24)
Registration Sensor 5-803-001 Paper
detected
Paper not
detected
9 Bypass paper width
sensor (S5)
Bypass Paper Width
Detection Sensor
5-803-004 Paper
detected
Paper not
detected
10 Paper feed
sensor (S31)
*1
Tray Exit Sensor 5-803-011 Paper
detected
Paper not
detected
10 Paper feed
sensor (S31)
*2
Feed Sensor 5-803-067 Paper
detected
Paper not
detected
11 Bypass tray lift sensor
(S4)
By-pass Lift Position
Sensor
5-803-010 Down Up
12 Tray paper end sensor
(main unit) (S30)
Tray Paper End
Detection Sensor
5-803-002 Paper
detected
Paper not
detected
13 Tray lift sensor (S35) Tray Lift Sensor 5-803-053 Down Up
*1 IM C300 series
*2 IM C400 series
Output Check
No. Part Name SP Name SP No. Remark
1 Tray lift
motor (M15)
Tray Lift
Motor
5-804-007 Do not execute this SP when the paper
feed tray is set.
If keeps the tray lift motor (M15) switched
ON, the bottom plate can lift up too much
because the tray lift sensor (S35) does not
work. This will cause the sensor to damage.
2 Paper feed
clutch (CL9)
Paper Feed
Clutch
5-804-002
3 Registration
clutch (CL8)
Registration
Clutch
5-804-001
4 Bypass feed
clutch (CL7)
Bypass Feed
Clutch
5-804-004
5 Bypass lift
clutch (CL1)
Bypass Lift
Clutch
5-804-005
14 vertical
transport clutch
(CL10)
*1
Transport
Clutch
5-804-114