NFC Card Reader Type M13 (D3AC-21)
SM 2-101 D0CA/D0C9/D0C8/D0CB
2.16.2 INSTALLATION PROCEDURE
This section includes the procedure for a machine that does not have the 1-Bin Tray Unit option.
However, this procedure can be used for a machine that has a 1-Bin Tray Unit installed.
• Turn OFF the main power and unplug the power cord from the wall socket. If the main
power is not turned OFF before installing, an electric shock or malfunction might occur.
1. Open the right cover.
2. Remove the front right cover [A] and hinge cover [B].
3. Remove the connector cover [A] on the operation panel.
To Next Page
Loading...
