NFC Card Reader Type M13 (D3AC-21)
D0CA/D0C9/D0C8/D0CB 2-104 SM
Make sure that the harnesses are not pinched between the red dotted areas in the photos.
11. Push the USB cable into the covers.
• Make sure that the cable fits in the slit [B].
12. Slide the cable cover [A] into the front right small cover as shown below.
13. Secure the cable cover together with the front right cover. ( × 1)
14. Attach the decal to the area [A] as shown below.
To Next Page
Loading...
