Bit Switches – 2
SM 71 D0CK
station usage for fax
printing
0: Enabled
1: Disabled
specified by User Parameter Switch 0F (15), or which is used
for the Specified Cassette Selection feature.
2* 3rd paper feed
station usage for fax
printing
0: Enabled
1: Disabled
3* 4th paper feed
station usage for fax
printing
0: Enabled
1: Disabled
4* LCT usage for fax
printing
0: Enabled
1: Disabled
5-
7
Not used Do not change the settings.
* This setting can be used for the client-side machine which has no FCU.
Printer Switch 03 (SP No. 1-103-004)
No Function Comments
0* Length reduction of received data
0: Disabled
1: Enabled
0: Incoming pages are printed without length reduction.
(Page separation threshold: Printer Switch 03, bits 4 to
7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04, bits 0
to 4)
1-
3
Not used Do not change the settings
4
to
7
Page separation setting when sub
scan compression is forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Page separation threshold (with reduction disabled with
switch 03-0 above).
For example, if this setting is set to "10", and A4 is the
selected paper size:
If the received document is 10 mm or less longer than
A4, then the 10 mm are cut and only 1 page prints.
If the received document is 10 mm longer than A4, then
To Next Page
Loading...
