Bit Switches – 5
SM 93 D0CK
0: No confirmation, 1:
Confirmation
the telephone number from the sender matches the registered
telephone number in this machine. If this confirmation fails, the line is
disconnected.
IP Fax Switch 01 (SP No. 1-111-002)
No. Function Comments
0-3 IP Fax delay level setting
Selects the acceptable delay level.
Level 0 is the highest quality
Default is "0000" (level 0).
Bit 3 Bit 2 Bit 1 Bit 0
0 0 0 0 Level 0
0 0 0 1 Level 1
0 0 1 0 Level 2
0 0 1 1 Level 3
4-7 IP Fax preamble wait time setting Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary switch combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
IP Fax Switch 02 (SP No. 1-111-003)
No. Function Comments
0 IP Fax bit signal reverse setting
0: Maker code setting
1: Internal bit switch setting
When "0" is selected, the bit signal reverse method is
decided by the maker code.
When "1" is selected, the bit signal reverse method is
decided by the internal bit switch.
When communicating between IP Fax devices, LSB first is
selected.)
1 IP Fax transmission speed
setting
0: Modem speed
1: No limitation
Selects the transmit speed for IP Fax communication.
2 SIP transport setting
0: TCP
1: UDP
This bit switch sets the transport that has priority for
receiving IP Fax data.
This function is activated only when the sender has both
TCP and UDP.
To Next Page
Loading...
