Dehumidification Heater (PFU)
SM 2-135 D0CA/D0C9/D0C8/D0CB
4. Join the two paper feed units with two joint brackets (rear) [A] and one screw [B]. (M3×6:
× 3 (included in this kit))
1: Rear
2: Front center
5. Bend and cut off the back cover tab [A] of the upper optional paper feed unit before
attaching it.
6. Reassemble the mainframe and the paper feed units.
When installing a mainframe with two paper feed units, attach the two paper feed units to
each other first, and then attach the paper feed units to the mainframe.
To Next Page
Loading...
