Firmware Update (Removable Media)
D0CA/D0C9/D0C8/D0CB 5-12 SM
7. Enter update date and time and specify the Retry Setting, then touch [Set].
In "Retry setting", it is set whether or not to retry when updating cannot be started
depending on the state of the machine.
8. When the following screen is displayed, pull out the removable media from the slot on the
operation panel, and then touch [OK].
Firmware update is executed at the programmed date and time.
Whether updating is possible or not depends on ARFU setting. However, whether to start
updating does not depend on SP5-886-111 (automatic update setting) setting.
To Next Page
Loading...
