Firmware Update (Smart Firmware Update)
SM 5-21 D0CA/D0C9/D0C8/D0CB
Maintenance
4. Touch [Execute Update].
5. Check the version of the received package firmware, and then touch [YES].
• The update is started.
• If the version of the reserved package in the HDD is older than the latest version,
the messages shown in the following picture are displayed.
• If you wish to download the latest version, touch [Execute] beside the message
"Download and update the latest package." Then the update of the package
firmware will be started.
• If you wish to update using the firmware in the HDD (old version), touch [Execute]
beside the message "Update to the received package."
6. [Update done] is displayed.
To Next Page
Loading...
