Firmware Update (Auto Remote Firmware Update)
SM 5-27 D0CA/D0C9/D0C8/D0CB
Maintenance
No. Situations in which the machine is determined to be in use
1 When the operation panel is used within 30 seconds
2 During firmware update
3 While firmware update is disabled
4 While printing (copy, printer, fax, re-printing via network)
5 While scanning (copy, scanner, fax)
6 Retrieving image data via the network
7 While initial setting ([Settings] icon) or SP is being set
8 While fax is transferring data
9 During on-hook/on the handset
10 During the PC-FAX process (from PC to machine data transfer to the end of the job)
11 While switching to/from the energy saving mode
12 When not being able to run the firmware update due to the modules that are running
e.g.) Waiting for DCS transfer (refer to appendix), accessing devices such as HDD/SD card,
etc.
13 While displaying a preview
14 While the document server function is in use
15 Connecting to TWAIN
16 During the interrupt copy process
17 While displaying the printer menu
18 While updating the display for the document server function via WIM or for stored fax
documents
19 While writing log information
20 While accessing the address book
21 During SC
22 While shutting down
To Next Page
Loading...
