Firmware Update (Auto Remote Firmware Update)
SM 5-31 D0CA/D0C9/D0C8/D0CB
Maintenance
SP Number Selection
Def.
Overview
most recent.
The record is created when the update has successfully finished.
When the update is canceled, no record is created.
SP7-520-031 to
035
Display
only
History of the package number (including suffix) for which update
has completed.
The five most recent are recorded, the lowest number being the
most recent.
The record is created when the update has successfully finished.
When the update is canceled, no record is created.
SP7-520-041 to
045
Display
only
History of the package version for which update has completed.
The five most recent are recorded, the lowest number being the
most recent.
The record is created when the update has successfully finished.
When the update is canceled, no record is created.
SP7-520-051 to
060
Display
only
History of the result of the download and the update.
Refer below for the numbers set.
No. Result Description
1 Downloading with SFU Cannot download or update as the machine is now
downloading the package for SFU.
2 HDD uninstalled Cannot download or update as the machine has no
HDD.
3 Updating with SFU Cannot download or update as the machine is being
updated with SFU.
4 HDD error Cannot download or update as the HDD cannot be
used.
5 Version information obtain error Cannot download or update as the version information
cannot be obtained.
6 Update download error Cannot download or update as the update download
failed.
In the non @Remote method, this shows that the
download failed because there was no proxy set.
7 Name resolution error Cannot download or update as the name cannot be
resolved upon downloading the update.
8 Auto update setting disabled The package has been downloaded but will not run the
update as SP5-886-111 (auto update setting) is disabled
To Next Page
Loading...
