Firmware Update (Auto Remote Firmware Update)
SM 5-33 D0CA/D0C9/D0C8/D0CB
Maintenance
No. Result Description
failure when the proxy is set) version information.
19 Update download error (proxy
verification failure)
Cannot download or update as the proxy verification
failed with proxy settings when downloading the
package.
20 Update download error (other
than proxy verification failure
when the proxy is set)
Cannot download or update as an error other than proxy
verification with proxy settings occurred when
downloading the package.
22 Update by retry successful After a power failure, unsuccessful update, or rebooting,
update by retry is executed successfully.
However, this does not apply to the case where the
update was canceled after the process was initiated
because a user selected “Cancel”.
In this case, the update is “successful” if the retry is not
executed between the start and completion of the next
update (76 hours after the cancellation).
23 Update data decompression has
failed
Receiving the update data successfully completed but
failed to update because update data decompression
failed.
Data in the package file may be corrupted, or data may
be garbled due to a defect in the DIMM or the HDD.
To Next Page
Loading...
