Card Save Function
D0CA/D0C9/D0C8/D0CB 5-70 SM
6. Select "Bit Switch 1 Settings" and use the numeric keypad to turn bit 4 ON and then press
the "#" button to register the change. The result should look like: 00010000. By doing this,
Card Save option will appear in the "List/Test Print" menu.
7. Press [Exit] to exit SP Mode.
8. Press [Settings] icon.
9. Press [Printer Setings].
10. Press [List/Test Print] > [Change Modes].
11. [Card Save (Add)] and [Card Save (New)] should be displayed on the screen. Select [Card
Save (Add)] or [Card Save (New)].
To Next Page
Loading...
