Internal Finisher
SM 7-39 D0CA/D0C9/D0C8/D0CB
stopper solenoid (SOL3)[A] moves the actuator [B] until it touches the top of the stack.
• When the remaining paper sensor (SN40) [A] detects the actuator, the tray lift motor (M22)
[C] lowers the end of the tray nearest the exit. This makes room for more paper on the tray
[B].
• If the tray lower limit sensor (S39) [D] is activated, the tray cannot be lowered any more.
To Next Page
Loading...
