Mechanism
D0CA/D0C9/D0C8/D0CB 8-16 SM
Communication
module/signal name
Details
applications. It communicates with the GW controller via the CATS
module.
CATS CATS stands for Cheetah Application Total System. It is a module in
the GW controller.
Because the Smart Operation Panel uses the Android OS, the contents
and protocols of communication are not the same as those of the
conventional control panel. CATS serves as an intermediary between
the GW controller and the Smart Operation Panel.
It also controls the power status of the control panel.
CATS communicates with the Smart Operation Panel using the
Flair-API, and communicates with the GW module using the GW-API.
GW-IPC The name of the interface used among modules in the GW controller.
The role is the same as that of the Flair-API.
• API stands for Application Programming Interface. An API is an interface that software
modules use in order to communicate with each other.
To Next Page
Loading...
