Ricoh IM C300

Security Settings
SM 2-45 D0CA/D0C9/D0C8/D0CB
Installation
1. Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during
overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.
Icon
[1]
This icon lights up when there is data to be overwritten, and flashes during
overwriting.
Overwriting starts automatically once the job is completed.
The Copier, Fax, and Printer functions take priority over the Auto Erase
Memory function. Overwriting will start after the job is completed.
Icon
[2]
The trash box of the icon is empty when there is no data to be overwritten.
This icon is also displayed when there is Hold Print/Stored Print/Locked
Print/Sample Print data in the hard disk.