Ricoh IM C300

Troubleshooting
SM 8-57 D0CA/D0C9/D0C8/D0CB
Smart
Operation
Panel
1. Keep your finger on the cross at the top right.
2. Check the result, and if the detection level is "3" or "4", adjust the MultiTouch sensitivity.
<Displayed Result Example>
Detection Level 1 (Best): No Problem. (Not required to adjust the sensitivity level.)
• Detection Level 2 (Fine environment): No Problem. (Not required to adjust the sensitivity
level.)
• Detection Level 3 (Non-recommended environment): Receiving the external noise
influence. (Required to adjust the sensitivity level)
• Detection Level 4 (Unusable environment): Receiving the external noise influence.
(Required to adjust the sensitivity level)
In "Checking the Influence of External Noise in the Installation