Rohde & Schwarz RTP Series - Ethernet Compliance Tests (Options R&S RTP-K22;K23;K25;K86)

Compliance tests
R&S
®
RTP
1080User Manual 1337.9952.02 ─ 12
Regularly check the USB-IF website compliance.usb.org/index.asp?Update-
File=Electrical&Format=Standard for USB-IF compliance updates.
USB 3.2 Test Equipment
For USB 3.2 compliance tests, the following test equipment is recommended:
●
R&S RTP oscilloscope with 4 channels and at least 16 GHz bandwidth.
●
At least one of the following test fixture sets:
– R&S RT-ZB2 USB 3.1 Demo Board 1
– USB3ET - USB 3.0 Electrical Test Fixture Kit
– USB31AET – USB 3.1 USB (10 GT/s) Type-A and Micro-B Electrical Test Fix-
ture Kit
– USB31CET – USB 3.1 USB (10 GT/s) Type-C Electrical Test Fixture Kit
●
Cables / adapters:
– 2x R&S RTP-ZA16 BNC to SMA adapter
– 2x SMA cable
●
R&S RTP-B6/R&S RTO-B6/R&S RTP-B6/Tabor WX2182B/Tabor WX2182C arbi-
trary waveform generator to generate Ping.LFPS to toggle compliance pattern.
●
R&S ScopeSuite software, which can be installed on a computer or directly on the
R&S RTP).
●
R&S RTP-K101 USB 3.2 compliance test option (required option, installed on the
R&S RTP)
20.2 Ethernet compliance tests (options R&S RTP-
K22/K23/K25/K86)
The Ethernet compliance test options enable the automatic testing of various Ethernet
standards:
●
10/100/1000BASE-T (R&S RTP-K22)
●
2.5/5/10GBASE-T (R&S RTP-K23)
●
100BASE-T1: (R&S RTP-K24)
●
1000BASE-T1: (R&S RTP-K87)
●
1000BASE-T1: (R&S RTP-K88
●
10BASE-T1: (R&S RTP-K89)
The test fixture and the Ethernet compliance test procedures are described in the sep-
arate manuals:
●
R&S®RTO, R&S®RTP Ethernet Compliance Test, User Manual"
●
"R&S®RT-ZF2 Ethernet Compliance Test Fixture Set Manual"
●
"R&S®RT-ZF3 Frequency Converter Manual
●
"R&S®RT-ZF4 10BASE-Te Fixture Manual
●
R&S®RT-ZF5 Ethernet Probing Fixture Manual
Ethernet compliance tests (options R&S
RTP-K22/K23/K25/K86)