Rohde & Schwarz RTP Series - Autonaming; Save; Recall

Instrument setup
R&S
®
RTP
127User Manual 1337.9952.02 ─ 12
4.8 Save / recall
4.8.1 Autonaming
Access:"Menu" > "Settings" key > "Maintenance" > "Autonaming" tab.
4.8.1.1 Autonaming settings
In this tab, you can define the pattern for automatic file name generation. This name is
used as the default file name. The default path is the storage location for all saved files
and their subdirectories.
Prefix
If enabled, inserts the default prefix in the file name. The prefix indicates the type of
data that is saved, for example, Histogram, RefCurve, Settings.
Remote command:
MMEMory:AUTonaming:PREFix on page 1183
User text (enable)
If enabled, inserts the specified user text after the prefix.
Remote command:
MMEMory:AUTonaming:USERtext on page 1183
Text input
User-defined text to be inserted after the prefix.
Save / recall