Rohde & Schwarz RTP Series - History

Remote control commands
R&S
®
RTP
1341User Manual 1337.9952.02 ─ 12
Example:
CALC:MATH1:DATA:HEAD?
-9.477E-008,9.477E-008,200000,1
Usage: Query only
CALCulate:MATH<m>:DATA[:VALues]?
Returns the data of the math waveform points for transmission from the instrument to
the controlling computer. The data can be used in MATLAB, for example.
To set the export format, use FORMat[:DATA].
You can retrieve only Y-values, or X- and Y-values. Use EXPort:WAVeform:
INCXvalues to define this.
Suffix:
<m>
.
1..8
Selects the math waveform.
Return values:
<Data> List of values according to the format and content settings.
Usage: Query only
22.10.4 History
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe]...............................................................1341
ACQuire:AVAilable?......................................................................................................1342
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent............................................................1342
CHANnel<m>[:WAVeform<n>]:HISTory:STARt................................................................ 1342
CHANnel<m>[:WAVeform<n>]:HISTory:STOP.................................................................1343
CHANnel<m>[:WAVeform<n>]:HISTory:TPACq............................................................... 1343
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY................................................................. 1344
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay..............................................................1344
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?.............................................................1344
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?.......................................................1345
CHANnel<m>[:WAVeform<n>]:HISTory:TSRelative?........................................................1345
CHANnel<m>[:WAVeform<n>]:HISTory:TSRReference?.................................................. 1345
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe] <State>
Enables or disables the history display.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Waveform analysis