Rohde & Schwarz RTP Series - Users Settings; Option Settings

Instrument setup
R&S
®
RTP
93User Manual 1337.9952.02 ─ 12
Time settings
Opens the standard Windows "Date and Time Properties" dialog box to set the correct
date and time. Only users with administrator rights can fulfill this task.
Note: Usually date and time are set correctly. To adjust your regional time, select the
correct time zone rather than changing the time.
Remote command:
SYSTem:DATE on page 1158
SYSTem:TIME? on page 1158
4.1.6 Users settings
Access: "Menu" > "Settings" > "System" > "Users"
Log on as
Sets the user that is automatically logged on during the startup process of the instru-
ment. The change of this setting takes effect at the next instrument startup.
See Chapter 21.1.1, "Logon", on page 1088 for restrictions of the standard user and
how to change the auto-logon.
"User autolo-
gon"
Auto-logon as standard user with limited access. Enter the "User
name": NormalUser and the "Password" of the standard user.
"Admin autolo-
gon"
Auto-logon with unrestricted access to the instrument and network.
The setting is only available for administrators. Enter the "User
name": Instrumen and the administrator's "Password" to enable the
auto-logon.
"None"
No auto-logon, user name and password are requested at instrument
startup.
4.2 Option settings
Additional options for the R&S RTP can be enabled using a license key. To obtain the
license key, consult your sales representative.
Option settings