Protocol analysis
R&S
®
RTP
775User Manual 1337.9952.02 ─ 12
Figure 13-19: Coding scheme of the 8b/10b
The additional two bits I and j that join the stream are variable and ensure the running
disparity.
There are two types of characters used in the 8b/10b coding, special characters Kx.y
and data characters Dx.y. x denotes the decimal value of EDCBA and is within the
range from 0 to 31. y denotes the decimal value of HGF and is within the range 0 to 7.
13.16.2 8b/10b configuration
13.16.2.1 8b/10b configuration settings
Access: [Protocol] key > "Setup" tab > "Protocol" = "8b/10b"
Make sure that the tab of the correct serial bus is selected.
8b/10b (option R&S RTP-K52)
To Next Page
Loading...
