Rohde & Schwarz RTP Series - Pcie Gen 1;2 Search

Protocol analysis
R&S
®
RTP
895User Manual 1337.9952.02 ─ 12
Table 13-43: Content of the Decode results table
Column Description
State Overall state of the packet
Start Start time of the packet
Type Type of packet
Table 13-44: Content of the Details frame table
Column Description
Sequence count Sequence count
Tag Tag of the packet
Length Length of packet
Completion Completion status field value
Address Value of the address
Bit rate The bit rate of the packet
Header FC Credit value of the header
Data FC Credit value of the payload data
Requester ID Requester ID
Completer ID Completer ID
State State of the field
Type Field type
Numeric Hexadecimal value of the field
Formatted Formatted content of the field
Tools
Press "Display settings" in the "Deode Reults" table, to access the "Display" tab.
Remote commands
Remote commands to retrieve decode results are described in Chapter 22.17.23.5,
"Decode results", on page 2140.
13.22.6 PCIe Gen 1/2 search
13.22.6.1 PCIe Gen 1/2 search settings
Access: [Protocol] > "Shortcuts" tab > "Setup search"
PCIe (option R&S
RTP-K72/K73)