Measurements
R&S
®
RTP
351User Manual 1337.9952.02 ─ 12
Remote command:
REFLevel<m>:ABSolute:BOTube on page 1440
MEASurement<m>:REFLevel:RESult:BOUTer? on page 1441
Relative outer
Defines a percentage of the signal level by which the absolute signal level may be
larger than the high signal level or lower than the low signal level to be considered high
or low, respectively.
Remote command:
REFLevel<m>:RELative:OTUBe on page 1438
Relative inner
Defines a percentage of the signal level by which the absolute signal level may be
higher than the low signal level or lower than the high signal level to be considered low
or high, respectively.
Remote command:
REFLevel<m>:RELative:ITUBe on page 1438
8.2.5 Amplitude/time measurements
8.2.5.1 Overview of amplitude/time measurements
Access: [Meas] > "Meas Group" tab > "Amp/Time" category
Automatic measurements
To Next Page
Loading...
