Rohde & Schwarz RTP Series - Page 1441

Remote control commands
R&S
®
RTP
1441User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1359.
Return values:
<SignalHigh> Range: -100E+24 to 100E+24
*RST: 0
Usage: Query only
Asynchronous command
MEASurement<m>:REFLevel:RESult:BINNer?
Returns the area above the low signal level which is still considered to be low level.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1359.
Return values:
<BottomInner> Range: -100E+24 to 100E+24
*RST: 0
Usage: Query only
Asynchronous command
MEASurement<m>:REFLevel:RESult:BOUTer?
Returns the area beneath the low signal level which is still considered to be low level.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1359.
Return values:
<BottomOuter> Range: -100E+24 to 100E+24
*RST: 0
Usage: Query only
Asynchronous command
MEASurement<m>:REFLevel:RESult:TINNer?
Returns the area beneath the high signal level which is still considered to be high level.
Suffix:
<m>
.
1..10
See "Selection of the measurement group: MEASurement<m>"
on page 1359.
Automatic measurements