Data and file management
R&S
®
RTP
474User Manual 1337.9952.02 ─ 12
Save to file
Enter the file name to save the setting data to, and select the file format with the format
button on the right. Double-tap the file name to open the file selection dialog box. See
also: Chapter 12.5, "File selection dialog", on page 509.
By default, saveset file names have the prefix "Settings_".
"Save"
Saves the data to the selected file.
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".dfl/.xml"
Selects the file format.
Remote command:
MMEMory:SAV on page 1523
12.1.1.2 Load saveset settings
Access: "Menu" key > "Save/Recall" key > "Recall" tab > "Savesets"
Load from file
Enter the file name to load the setting data from, and select the file format with the for-
mat button on the right. Double-tap the file name to open the file selection dialog box.
See also: Chapter 12.5, "File selection dialog", on page 509.
By default, saveset file names have the prefix "Settings_".
"Open"
Opens a file selection dialog box and loads the selected file.
Remote command:
MMEMory:RCL on page 1523
12.1.2 One File
The One File function stores the savesets file and the data of active reference wave-
forms together in a ZIP file. If you want to keep channel waveform data together with
Save and recall user settings
To Next Page
Loading...
