Rohde & Schwarz RTP Series - CSV Export

Instrument setup
R&S
®
RTP
129User Manual 1337.9952.02 ─ 12
The directory selection dialog box is opened.
5. Select the folder in which the data is stored by default. Use the symbols on the left
of the file explorer box to switch to often used directories.
6. To restore the factory-set default path, tap "Reset" next to the path field.
To define the automatic file name pattern
The automatic file name pattern can consist of the following elements:
<Prefix>_<UserText>_<Date>_<Index>_<Time>
The prefix depends on the data type to be stored and cannot be changed by the user.
The other elements can be enabled or disabled as required.
1. Tap "Menu" > "Settings".
2. Select the "Save /Recall" tab.
3. Select the "Autonaming" tab.
4. To insert a user-defined text after the prefix, enter the text in the edit field. and
enable "User text".
5. If you want to exclude the prefix, current date, time or an index (serial number), dis-
able the corresponding option.
The specified elements are used to generate the default file name for the next stor-
age operation.
4.8.2 CSV export
Access: "Menu" > "Settings" key > "Save /Recall" > "CSV Export" tab.
In this dialog, you can define the format of your CSV file.
Decimal symbol
Selects if point or comma is used as a decimal symbol in the exported CSV file.
Remote command:
EXPort:RESult:DECSymbol on page 1546
Csv delimiter
Selects the list separator symbol from a list. Available are semicolon, comma, space,
tab and colon.
Save / recall