Rohde & Schwarz RTP Series - Long Term Measurement Results and Measurement Histogram Export to File

Remote control commands
R&S
®
RTP
1537User Manual 1337.9952.02 ─ 12
EXPort:RESult:NUMeric <Numeric>
If ON, the result values are saved without unit and with more decimal places.
Parameters:
<Numeric> ON | OFF
*RST: OFF
EXPort:RESult:NAME <ExportFilename>
Sets the path, the file name, and the file format for the numeric results file. Available
file formats are CSV and HTML.
Parameters:
<ExportFilename> String parameter
EXPort:RESult:SAVE
Saves the selected result boxes to the file that is specified with EXPort:RESult:
NAME.
Usage:
Event
22.16.8 Long term measurement results and measurement histogram
export to file
EXPort:MEASurement:SELect.......................................................................................1537
EXPort:MEASurement:TYPE.........................................................................................1537
EXPort:MEASurement:NAME........................................................................................1538
EXPort:MEASurement:SAVE.........................................................................................1538
EXPort:MEASurement:DATA?....................................................................................... 1538
EXPort:MEASurement:SELect <SelcMeas>
Selects the measurement for export of long term or measurement histogram data.
Parameters:
<SelcMeas> MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5 | MEAS6 |
MEAS7 | MEAS8
*RST: MEAS1
Example: See "Exporting long-term measurement data to file"
on page 1131
Usage: Asynchronous command
EXPort:MEASurement:TYPE <ExportType>
You can export the result data of the long term measurement, or the measurement his-
togram, or the track data.
Data management