Remote control commands
R&S
®
RTP
1605User Manual 1337.9952.02 ─ 12
SEARch:RESult:SPI:FRAMe<m>:WORD<n>:STOP? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<FrameWordStop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
22.17.5
UART/RS-232/RS-422/RS-485 (option R&S RTP-K2)
● Configuration.......................................................................................................1605
● Trigger................................................................................................................. 1611
● Decode results.................................................................................................... 1613
22.17.5.1 Configuration
BUS<m>:UART:RX:SOURce.........................................................................................1605
BUS<m>:UART:TX:SOURce......................................................................................... 1606
BUS<m>:UART:RX:THReshold..................................................................................... 1606
BUS<m>:UART:TX:THReshold......................................................................................1606
BUS<m>:UART:TECHnology.........................................................................................1607
BUS<m>:UART:BITRate...............................................................................................1607
BUS<m>:UART:BAUDrate............................................................................................ 1608
BUS<m>:UART:PARity................................................................................................. 1608
BUS<m>:UART:POLarity.............................................................................................. 1608
BUS<m>:UART:SBIT....................................................................................................1609
BUS<m>:UART:SSIZe..................................................................................................1609
BUS<m>:UART:PACKets..............................................................................................1609
BUS<m>:UART:TOUT.................................................................................................. 1610
BUS<m>:UART:EWORd...............................................................................................1610
BUS<m>:UART:RX:SOURce <RxSource>
Selects the input channel for the receiver signal.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols
To Next Page
Loading...
Need help?
General
