Network operation and remote control
R&S
®
RTP
1096User Manual 1337.9952.02 ─ 12
7. On the "General" tab, select "Use the following DNS server addresses" and enter
your own DNS addresses.
For more information, refer to the Windows operating system help.
21.2.4 Changing the windows firewall settings
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde & Schwarz highly recommends the use of the firewall on
your instrument. Rohde & Schwarz instruments are shipped with the Windows firewall
enabled and preconfigured in such a way that all ports and connections for remote
control are enabled.
For more details on firewall configuration, see the following Rohde & Schwarz White
Paper:
●
1EF96: Malware Protection Windows 10
Note that changing firewall settings requires administrator rights.
Setting up a network (LAN) connection
To Next Page
Loading...
