Rohde & Schwarz RTP Series - Operator Editor

Waveform analysis
R&S
®
RTP
292User Manual 1337.9952.02 ─ 12
The setting is relevant for waveforms with waveform arithmetic mode "Envelope" or
with "Peak detect" decimation. All mathematic operations - except for derivation - can
be applied to envelope waveforms and waveforms with "Peak detect" decimation.
Remote command:
CALCulate:MATH<m>:ENVSelection on page 1337
7.3.3 Operator editor
In theOperator editor, you can define the most common mathematical formulas without
knowing their correct syntax.
Remote command:
●
CALCulate:MATH<m>[:EXPRession][:DEFine] on page 1337
7.3.3.1 Settings in the Operator editor
Source 1 / 2.................................................................................................................293
Type............................................................................................................................ 293
Noise reject................................................................................................................. 293
a / b............................................................................................................................. 293
Mathematics