Rohde & Schwarz RTP Series - Autonaming

Remote control commands
R&S
®
RTP
1525User Manual 1337.9952.02 ─ 12
SAVeset:ONEFile:NAME <Name>
Sets the path and the file name of the One File. The file format is ZIP.
Parameters:
<Name> String parameter
SAVeset:ONEFile:OPEN
Loads the One File that is specified with SAVeset:ONEFile:NAME.
Usage: Event
SAVeset:ONEFile:SAVE
Usage:
Event
Saves the One File data to the file that is specified with SAVeset:ONEFile:NAME.
22.16.3 Autonaming
MMEMory:AUTonaming:PREFix.................................................................................... 1525
MMEMory:AUTonaming:USERtext.................................................................................1525
MMEMory:AUTonaming:DATE.......................................................................................1525
MMEMory:AUTonaming:INDex...................................................................................... 1525
MMEMory:AUTonaming:TIME....................................................................................... 1525
MMEMory:AUTonaming:TEXT.......................................................................................1526
MMEMory:AUTonaming:DEFaultpath............................................................................. 1526
MMEMory:AUTonaming:RESPath..................................................................................1526
MMEMory:AUTonaming:RESall..................................................................................... 1526
MMEMory:AUTonaming:PREFix <State>
MMEMory:AUTonaming:USERtext <State>
MMEMory:AUTonaming:DATE <State>
MMEMory:AUTonaming:INDex <State>
MMEMory:AUTonaming:TIME <State>
Includes or excludes the name part in the file name pattern for automatic file name
generation. This name is used as the default file name.
The prefix indicates the type of data that is saved, for example, Histogram, RefCurve,
Settings.
To define a user text, use MMEMory:AUTonaming:TEXT.
Parameters:
<State> ON | OFF
*RST: ON
Data management