Rohde & Schwarz RTP Series - Working with Waveforms

Getting started
R&S
®
RTP
69User Manual 1337.9952.02 ─ 12
3.3.4 Working with waveforms
The R&S RTP can create and display many waveform types. The most importand are:
●
Channel waveforms:
Up to three waveforms per input channel can be shown. For a four-channel instru-
ment, 12 channel waveforms are available.
●
Reference waveforms:
Four waveforms can be used as reference for comparison and analysis.
●
Math waveforms:
Eight mathematic waveforms can be created with mathematic operations per-
formed on channel, reference, and other math waveforms.
●
Zoom waveforms:
Show the details of waveforms.
●
XY-waveforms:
Four XY-waveforms can be created. Each XY-waveform is built from the voltage
values of two source waveforms.
●
Digital waveforms:
The Mixed Signal Option R&S RTP-B1 provides 16 digital channels grouped in two
logic probes (pods) with 8 channels each.
Operating the instrument