Remote control commands
R&S
®
RTP
1295User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..3
Parameters:
<SkipStart>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I30B:SYMType <SymbolType>
Selects the type of pattern, control block or the data block.
Suffix:
<m>
.
1..3
Parameters:
<SymbolType> OS | DAT
*RST: DAT
Usage: Asynchronous command
22.9.14 TV/Video trigger
The TV or video trigger requires a channel input as trigger source (TRIGger<m>:
SOURce[:SELect]). It is only available for the A-event (Suffix = 1).
Make sure to set the trigger level - the threshold of the sync pulse - with TRIGger<m>:
LEVel<n>[:VALue].
TRIGger<m>:TV:STANdard...........................................................................................1295
TRIGger<m>:TV:MODE................................................................................................1296
TRIGger<m>:TV:POLarity.............................................................................................1297
TRIGger<m>:TV:LINE.................................................................................................. 1297
TRIGger<m>:TV:LFIeld.................................................................................................1298
TRIGger<m>:TV:CUSTom:SCANmode...........................................................................1298
TRIGger<m>:TV:CUSTom:LDURation............................................................................1299
TRIGger<m>:TV:CUSTom:STYPe................................................................................. 1299
TRIGger<m>:TV:CUSTom:SDURation........................................................................... 1299
TRIGger<m>:TV:STANdard <Standard>
Sets the TV standard.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
Parameters:
<Standard> CUSTom | PAL | PALM | NTSC | SECam | P480L60HZ |
P720L30HZ | P720L50HZ | P720L60HZ | I1080L50HZ |
I1080L60HZ | P1080L24HZ | P1080L24HZSF | P1080L25HZ |
P1080L30HZ | P1080L50HZ | P1080L60HZ
Trigger
To Next Page
Loading...
