Rohde & Schwarz RTP Series - User Preferences

Data and file management
R&S
®
RTP
476User Manual 1337.9952.02 ─ 12
Load from file
Select "Open" to open the file selection dialog box, and to select the required file. See
also: Chapter 12.5, "File selection dialog", on page 509.
By default, one file names have the prefix "OneFile_".
Remote command:
SAVeset:ONEFile:NAME on page 1525
SAVeset:ONEFile:OPEN on page 1525
Include user preferences
If enabled, the user preferences settings are included in the one file. They include the
user-specific display settings like diagram layout, toolbar, intensity and transparency
settings.
12.1.3 User preferences
User preferences contain user-specific display settings like diagram layout, toolbar,
intensity and transparency settings.
12.1.3.1 Save user preferences settings
Access: "Menu" key > "Save/Recall" key > "Save" tab > "User Preferences"
Save to file
The file name to save the data to.
Save and recall user settings