Rohde & Schwarz RTP Series - Option R&S RTP-K6)

Remote control commands
R&S
®
RTP
1685User Manual 1337.9952.02 ─ 12
Return values:
<ByteState> OK | STERror | SPERror | PRERror | UVAL | NOEXists |
INSufficient
*RST: OK
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:VALue? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<ByteValue> Range: 0 to 255
Increment: 1
*RST: 0
Usage: Query only
22.17.8 MIL-1553 (option R&S RTP-K6)
● Configuration.......................................................................................................1685
● Trigger.................................................................................................................1688
● Decode results.................................................................................................... 1698
● Search settings................................................................................................... 1701
● Search results..................................................................................................... 1708
22.17.8.1 Configuration
BUS<m>:MILStd:SOURce............................................................................................ 1685
BUS<m>:MILStd:MAXResponse:BITS........................................................................... 1686
BUS<m>:MILStd:MAXResponse:SELect........................................................................ 1686
BUS<m>:MILStd:MINGap:SELect..................................................................................1686
BUS<m>:MILStd:MINGap:BITS.....................................................................................1686
BUS<m>:MILStd:POLarity............................................................................................ 1687
BUS<m>:MILStd:PRESet..............................................................................................1687
BUS<m>:MILStd:THReshold:HIGH................................................................................1687
BUS<m>:MILStd:THReshold:LOW.................................................................................1687
BUS<m>:MILStd:SOURce <SourceData>
Sets the channel for the signal source.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols