Rohde & Schwarz RTP Series - Save and Load the Deembedding Setup

Remote control commands
R&S
®
RTP
2295User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Parameters:
<DelayCompens> ON | OFF
*RST: ON
Usage: Asynchronous command
DEEMbedding<m>:PRESet
Sets the complete deembedding configuration to the default values.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Usage: Event
Asynchronous command
22.23.2 Save and load the deembedding setup
DEEMbedding<m>:NAME.............................................................................................2295
DEEMbedding<m>:SAVE..............................................................................................2295
DEEMbedding<m>:OPEN.............................................................................................2296
DEEMbedding<m>:DELete........................................................................................... 2296
DEEMbedding<m>:NAME <Path>
Sets the file name, file format and path of the deembedding setup file. The file format is
always .xml.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Parameters:
<Path> String with path and file name with extension .xml
Usage: Asynchronous command
DEEMbedding<m>:SAVE
Saves the deembedding configuration to the file specified with DEEMbedding<m>:
NAME.
Suffix:
<m>
.
1..4
Selects the channel that is configured for deembedding.
Usage: Event
Deembedding (Option R&S RTP-K121/-K122)