Rohde & Schwarz RTP Series - Results

Remote control commands
R&S
®
RTP
1536User Manual 1337.9952.02 ─ 12
Example: See "Exporting histogram data to file" on page 1130
Usage: Asynchronous command
EXPort:HISTogram:SAVE
Saves the histogram to the file specified with EXPort:HISTogram:NAME.
Example: See "Exporting histogram data to file" on page 1130
Usage: Event
Asynchronous command
EXPort:HISTogram:DATA?
Transfers the histogram data to the controlling computer. The data can be used in
MATLAB, for example.
To set the export data format, use FORMat[:DATA].
Return values:
<Data> List of values according to the format settings and EXPort:
HISTogram:INCidence.
Example: See "Transferring histogram data" on page 1130.
Usage: Query only
22.16.7 Results
EXPort:RESult:SELect..................................................................................................1536
EXPort:RESult:NUMeric................................................................................................1537
EXPort:RESult:NAME...................................................................................................1537
EXPort:RESult:SAVE....................................................................................................1537
EXPort:RESult:SELect <Item>, [<STATe>]
EXPort:RESult:SELect? <Item>
Select the results that you want to save to file. All results are written into one file. To
save several result boxes into one file, use the command several times, one command
for each result box.
Parameters:
<STATe> ON | OFF
Parameters for setting and query:
<Item> String parameter, contains the name of the result box as written
in the "Numeric Results" dialog box.
Example:
EXPort:RESult:SELect 'Meas Results',1
Selects the 'Meas Results' box for export of numeric values.
Data management