Protocol analysis
R&S
®
RTP
694User Manual 1337.9952.02 ─ 12
Column Description
State Overall state of the frame.
"Insuffcient waveform length" indicates that the frame is not completely contained
in the acquisition. Change the horizontal scale, or move the reference point to the
left to get a longer acquisition.
Value Values of the data bytes.
Tools
Press "Display settings" in the "Deode Reults" table, to access the "Display" tab.
Remote commands
Remote commands to retrieve decode results are described in Chapter 22.17.13.3,
"Decode results", on page 1826.
13.12.6 Search on decoded RFFE data
Using the search functionality, you can find various events in the decoded data, the
same events which you also can trigger on. Before you can start the search, you have
to configure the bus correctly and acquire decoded data.
To search on decoded data, set the search "Source" to the serial bus that is configured
for the protocol to be analyzed.
See also Chapter 11, "Search functions", on page 448.
13.12.6.1 RFFE search setup
Access: [Protocol] > "Shortcuts" tab > "Setup search"
Type
The search criterion is defined by "Type". All trigger types are also available for search.
RFFE (option R&S
RTP-K40)
To Next Page
Loading...
