Rohde & Schwarz RTP Series - Quick Action] Setup

Remote control commands
R&S
®
RTP
1182User Manual 1337.9952.02 ─ 12
22.7.4 [Quick action] setup
QACTion:MODE...........................................................................................................1182
QACTion:EXECute....................................................................................................... 1182
QACTion:PATH............................................................................................................ 1182
QACTion:PARameters.................................................................................................. 1183
QACTion:WDIRectory...................................................................................................1183
QACTion:MODE <Mode>
Sets the action that is initiated by the Quick Action key.
Parameters:
<Mode> NONE | APPL | RECA | CLS
APPL
Starts an external application. Select the path of the application
executable, additional parameters, and the working directory.
RECA
Graphical recall, opens the "Load saveset" window to select and
load instrument settings.
CLS
Clear all, deletes the measurement results, statistics, all wave-
forms, and the history.
*RST: NONE
Example: Reset the Quick Action key to no action:
QACTion:MODE NONE
Usage: Asynchronous command
QACTion:EXECute
Tests the Quick Action setup.
Usage:
Event
Asynchronous command
QACTion:PATH <ApplicationPath>
Sets the path to the application executable.
Parameters:
<ApplicationPath> String parameter containing path, filename, and file extension
Example:
QACTion:MODE APPL
QACTion:PATH 'C:\Program Files\Wireshark\Wireshark.exe'
QACTion:EXECute
*OPC?
Usage: Asynchronous command
Instrument setup