Remote control commands
R&S
®
RTP
2081User Manual 1337.9952.02 ─ 12
SEARch:RESult:USBThree:FRAMe<m>:FLD<n>:VAL? <SearchName>
Returns the value of the field with the selected field number within the frame with the
selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<ByteValue>
Usage: Query only
SEARch:RESult:USBThree:FRAMe<m>:FLD<n>:FVAL? <SearchName>
Returns the formatted value of the field with the selected field number within the frame
with the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<ValueFormatted>
Usage: Query only
22.17.21 USBPD (option R&S RTP-K63)
● Configuration.......................................................................................................2081
● Trigger.................................................................................................................2083
● Decode results.................................................................................................... 2089
● Search settings................................................................................................... 2094
● Search results..................................................................................................... 2100
22.17.21.1 Configuration
In all BUS<m>:USBPd commands, the suffix <m> selects the serial bus.
BUS<m>:USBPd:DETail............................................................................................... 2082
BUS<m>:USBPd:HYSTeresis........................................................................................2082
BUS<m>:USBPd:SOURce............................................................................................2082
Protocols