Network operation and remote control
R&S
®
RTP
1089User Manual 1337.9952.02 ─ 12
To configure the auto-logon for administrator
Starting situation: the auto-logon is configured for a standard user ("NormalUser").
1. Open "Menu" > "Settings" > "System" > "Users"
2. Set "Logon as" to "None".
3. Exit the firmware.
4. Sign out from the operating system.
5. Log on as administrator ("Instrument").
6. Set the "Logon as" to "Admin autologon". Enter the "User name": Instrument and
the administrator's password.
7. Restart the instrument.
21.1.2 Service packs and updates
Microsoft regularly creates security updates and other patches to protect Windows-
based operating systems. These are released through the Microsoft Update website
and associated update server. Instruments using Windows, especially those that con-
nect to a network, should be updated regularly.
For details and recommendations, see the following Rohde & Schwarz white paper:
●
1EF96: Malware Protection Windows 10
21.1.3 Virus protection
Take appropriate steps to protect your instruments from infection. Use strong firewall
settings and scan any removable storage device used with a Rohde & Schwarz instru-
ment regularly. It is also recommended that you install anti-virus software on the instru-
ment. Rohde & Schwarz does NOT recommend running anti-virus software in the
background ("on-access" mode) on Windows-based instruments, due to potentially
degrading instrument performance. However, Rohde & Schwarz does recommend run-
ning it during non-critical hours.
For details and recommendations, see the following Rohde & Schwarz white paper:
●
1EF96: Malware Protection Windows 10
21.1.4 Backup and recovery
The R&S RTP has a backup partition with an application for backup and restore the
firmware. The backup of the factory default state is always available. You can save
additional backups, for example, before a firmware update or to provide different sys-
tem configurations for different environments.
The backup saves the current instrument installation and its configuration. Data are not
saved in the backup.
Operating system
To Next Page
Loading...
