Rohde & Schwarz RTP Series - Ethernet 1000 BASE-T1 (Option R&S RTP-K58)

Remote control commands
R&S
®
RTP
1780User Manual 1337.9952.02 ─ 12
SEARch:RESult:HBTO:FRAMe<m>:WORD<n>:TYPE? <SearchName>
Returns the data type of the selected word within the search result.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<WordType> String parameter
Usage: Query only
SEARch:RESult:HBTO:FRAMe<m>:WORD<n>:VALue?
<SearchName>
Returns the data value of the selected word within the search result.
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
22.17.12 Ethernet 1000BASE-T1 (option R&S RTP-K58)
● Configuration.......................................................................................................1780
● Decode results.................................................................................................... 1783
● Trigger.................................................................................................................1789
● Search settings................................................................................................... 1797
● Search results..................................................................................................... 1805
22.17.12.1 Configuration
In all BUS<m>:TBTO commands, the suffix <m> selects the serial bus.
BUS<m>:TBTO:ATTN <Attenuation>
Sets the attenuation factor. It is used to de-amplify the reverse signal before subtract-
ing it from the forward signal.
Protocols