Triggers
R&S
®
RTP
230User Manual 1337.9952.02 ─ 12
The individual settings are:
●
"Slope" on page 217
●
"Pattern" on page 230
●
"Trigger Levels" on page 231
●
"Find level" on page 217
●
"Couple levels (Trigger level and hysteresis coupling)" on page 229
6.3.12 Pattern
Access: "Menu">"Trigger" > "Setup" tab > "Type = Pattern"
The pattern trigger is a logic trigger. It provides logical combination of the input chan-
nels and supports you in verifying the operation of digital logic. In addition to the pat-
tern and the trigger levels, you can define a timing condition.
The setup of the pattern trigger is similar to trigger qualification. The complete settings
for the pattern trigger are provided in the "Qualification" tab.
Pattern
The pattern contains the channel selection, and the logical operations structure of
hardware-based Boolean logic.
Trigger types
To Next Page
Loading...
